<ins id="qhx66"></ins>

    <output id="qhx66"><track id="qhx66"></track></output><tr id="qhx66"></tr>
    <code id="qhx66"></code>
    <code id="qhx66"></code><code id="qhx66"><acronym id="qhx66"></acronym></code>
    ?

    全国服务热线:

    15853163650
    您当前的位置:首页 > 新闻动态 > 公司动态
      联系我们

      CONTACTS US

      地址:山东济南历城区华龙路嘉恒大厦A座1201室

      邮箱:hhjc168@126.com

      公司传真: 0531-88518398

      电话:15853163650

    公司动态

    COMPANY NEWS

    uv行业板材的选择六大要点

    2016-05-13 17:17:25 文章来源:www.crbanking.com

    1、买UV板要选有知名度的企业。产品不但有国家权威部门的检测报告,产品包装上还要有完整的标识。
    1, buy UV board to choose a well-known enterprises. Products not only have the national authority of the inspection report, the product packaging also has a complete logo.
    2、看耐磨转数。家庭用地板耐磨转数一般选择4000转以上就够了,而在公共场所一般选择9000转以上。装饰层需耐光照。
    2, abrasion resistance. Floor wear-resisting generally choose more than 4000 rpm is enough, and in public places generally choose to turn over 9000. The decorative layer to light.
    3、查甲醛释放量。装饰中的甲醛释放量不高于1.5mg/L就OK。
    电梯门套

    3, check the amount of formaldehyde released. Decoration of the formaldehyde release is not higher than OK on the 1.5mg/L.
    4、看基材密度。UV板的基材密度须在0.84至0.9/cm3,密度太低或者太高都不合适。
    4, to see the substrate density. UV board substrate density must be in the 0.84 to 0.9/cm3, the density is too low or too high are not suitable.
    5、看耐水性能。UV板不会吸水膨胀,但其他木地板的话标值高,耐水性就会差,在潮湿环境下易产生尺寸变化,吸水厚度膨胀率应不高于2.5%。
    5, look at the water resistance. UV board not swelling, but the other wood floor of the scalar value is high, poor water resistance will, in the humid environment is easy to produce size change, absorbent thickness expansion rate should be not more than 2.5%.
    6、看加工密度。检查产品是否光滑平整,榫槽咬合是否适合,不可过松,也不可过紧。
    6, see processing density. Check whether the product is smooth, tenon bite is suitable, can not be too loose or too tight.

     

    ope体育