<ins id="qhx66"></ins>

    <output id="qhx66"><track id="qhx66"></track></output><tr id="qhx66"></tr>
    <code id="qhx66"></code>
    <code id="qhx66"></code><code id="qhx66"><acronym id="qhx66"></acronym></code>
    ?

    全国服务热线:

    15853163650
    您当前的位置:首页 > 新闻动态 > 行业新闻
      联系我们

      CONTACTS US

      地址:山东济南历城区华龙路嘉恒大厦A座1201室

      邮箱:hhjc168@126.com

      公司传真: 0531-88518398

      电话:15853163650

    行业新闻

    COMPANY NEWS

    泰安电梯套厂家

    2018-07-16 11:14:47 文章来源:www.crbanking.com


    泰安电梯套厂家现在要告诉我们的是一个重要的常识,那就是电梯门套的资料要求和技能要求。dtmtx1689

    Tai'an elevator manufacturers now want to tell us an important common sense, that is, elevator door information requirements and skills requirements. Dtmtx1689


    一、资料要求:
    依据电梯套口施工图纸的具体要求、标准,所用的资料依照甲方供给的标准进行施工,所用的资料石材和钢材均有出厂合格证和有关陈述,经甲方认可后方可施工。

    1. Information requirements:
    According to the specific requirements and standards of the construction drawings of the elevator sleeve, the data used in the construction according to the standards provided by Party A. The materials and materials used are certified and related to the factory. After approval by Party A, it can be constructed.

    电梯套
    二、电梯套的技能要求:

    依照有关电梯套口的施工办法和检收标准进行,门口的上部选用50*50*5的钢铁在洞口的上部用胀大丝把角铁固定牢固,然后与下部的铁件进行衔接,电梯门洞口里侧立面方位用水泥板与铁件用螺丝衔接。


    洞口上侧的理石板与顶部的铁件定在一同,顶部石理板和洞口上部的空泛用发泡剂充分,两侧面选用湿挂理石的办法进行施工。

    The stone plate on the upper side of the hole is fixed together with the iron on the top, and the top stone plate and the upper part of the hole are fully used as foaming agent, and the wet hanging stone is used on both sides to carry out the construction.

    理石的接搓部位依照检收标准垂直和平整度控制允许的差错之内,剪力墙体选用胀大螺丝害定,用铜丝和理石衔接,理石和剪力墙中心用细石混凝土充分。

    In accordance with the allowable error, the shear wall is determined by swell screw, with copper wire and stone, and the center of stone and shear wall is full of fine stone concrete.


    ope体育