<ins id="qhx66"></ins>

    <output id="qhx66"><track id="qhx66"></track></output><tr id="qhx66"></tr>
    <code id="qhx66"></code>
    <code id="qhx66"></code><code id="qhx66"><acronym id="qhx66"></acronym></code>
    ?

    全国服务热线:

    15853163650
    您当前的位置:首页 > 新闻动态 > 行业新闻
      联系我们

      CONTACTS US

      地址:山东济南历城区华龙路嘉恒大厦A座1201室

      邮箱:hhjc168@126.com

      公司传真: 0531-88518398

      电话:15853163650

    行业新闻

    COMPANY NEWS

    吉林电梯门套怎么安装

    2018-06-28 10:49:42 文章来源:www.crbanking.com

    电梯门套怎么安装实在是很重要的,如果不知道怎么安装,那就是相当于瞎子走路一样,不知道往哪里走。今天就给大家分享一下电梯门套都是怎么安装的!

    How to install the elevator door is very important. If you do not know how to install it, it is equivalent to a blind person walking, do not know where to go. Today, I want to share with you how the elevator door fitting is installed.


    1、按照设计图纸查看门的规格、型号、相关配件等。

    1, according to the design drawings to check the door specifications, models, related accessories and so on.


     2、用米尺量门洞的高与宽。国家标准的电梯门尺寸1150kg电梯的开门净尺寸为1000*2100、1000kg电梯的开门净尺寸为900*2100、800kg电梯的开门净尺寸为800*2100、630kg电梯的开门净尺寸为800*2100

    2. Use a meter to measure the height and width of the door hole. National standard elevator door size 1150Kg elevator door net size of 1000*2100, 1000kg elevator door net size of 900*2100, 800kg elevator door net size of 800*2100, 630kg elevator door net size 800*2100

    吉林电梯门套

    3、确定门套的的方向,用墨斗弹拉出垂直线,一侧门洞两条垂直线。

    3, determine the direction of the door, use the ink bomb to pull out the vertical line, one side door and two vertical lines.


     4、在垂直线上用划好间隔线约为30厘米,一侧门两排划分十几个粘节点。

    4, draw a good spacing line about 30 cm on the vertical line, and divide more than a dozen sticky nodes on the side gate and the two row.


    5、将小木楔用铁锤逐一钉入每个粘节点,以便固定门框板。小木楔以落叶松制造的为好,因为落叶松的木质结构紧,不容易松动。

    5, the small wedges are hammered into each sticky joint one by one, so that the door frame can be fixed. The wooden wedge is made of larch, because the wood structure of Larix gmelinii is tight, and it is not easy to loose.


    6、左右做两边门框龙骨的木工板尺度为200厘米×3厘米×8厘米,门框顶龙骨的木工板尺度为80厘米×3厘米×8厘米。将高密度九厘板涂胶粘在龙骨上,再用专用胶节点固定。

    6, about 200 square centimeters, 3 centimeters and 8 centimeters, and the size of the woodwork board is 80 cm x 3 cm * 8 centimeters. Glue the high density nine - board to the keel and fix it with special glue joint.


    7、将整理好的三条门套按门的形状连接起来,而且用专用胶子在接合处粘固。

    7. Connect the three door James to the shape of the door, and use special glue to bond them.


    电梯门套厂家小编分享的吉林电梯门套怎么安装,希望对大家有所帮助。

    Elevator door manufacturers Xiaobian share how to install the elevator door fitting in Jilin, we hope to help everyone.


    ope体育